Shopping Cart
There are no more items in your cart
- 0 likes
- 1950 views
- 0 comments
What is more important - the tip or the rod?
Many experienced anglers assure that choosing the right tip is more important than choosing the rod itself. Why? Even if you have the best rod in your hand, but put a poor tip on the end of it, you will not see a bite.
In the case of method feeder fishing, it is difficult to miss a bite, signaled quite quickly and rapidly, especially by larger specimens. However, if you use a classic basket and long, delicate leaders that delay signaling, a high-quality tip is an absolute must-have.
Consider one more point. In a classic feeder, the fish, swimming away with the bait in its mouth, is able to spit it out if it only feels a slight resistance. If the tip did not transmit clear information, you could lose the chance of a good bite because of this.
The conclusion? It's worth investing in a professional feeder tip. We have plenty of them in our online store! If you want to know how to adjust the tip to the type of fishery and technique, here is a handful of practical information.
Materials from which the tops are made
Peak tips are divided according to the material from which they are made:
-
Carbon fiber tips - the most popular and available in sets with modern rods. They provide good balance when deflected and quickly dissipate kinetic energy after casting (so they do not "rock" constantly). On the other hand, carbon fiber is easy to damage.
-
Fiberglass tops. This is a material that manufacturers have been reaching for for many years. Unfortunately, there is a characteristic "rocking" moment with fiberglass tips. They provide great flexibility, high resistance to damage and can be purchased at an attractive price. Caution - such tips are not used when fishing over long distances, in strong winds or in rivers with rapid current.
-
Titanium tips. Impossible to break and very accurate. These tips usually have two parts. The lower one (made of carbon fiber) is mounted to the rod, and the upper one (made of titanium) indicates bites.
In classic feeder and method, any of the aforementioned tips can be used.
What is the deflection curve (oz) of a feeder tip?
Manufacturers of feeding tips label them with the parameter of deflection curve. It is expressed in ounces (oz; 1 oz = 28.35 g). This is the weight under which the tip will bend by 90 degrees. The lower the value, the more sensitive and softer the tip. Recognizing the right equipment is made easier by the fact that equipment manufacturers label their tips with different colors.
How sensitive should a feeder tip be?
-
When fishing on the method with feeders of 20-30 g, the tip can be from 0.75 to even 2 oz. Actually, the heavier the feeder (or stronger the current of the river), the stronger the tip you need to install.
-
In a classic feeder, you should judge the tip by the size of the fish, the distance of the cast and the strength of the wind or river current. For medium-sized fish, 1.5-2 oz is enough, but for large carp it is worth preparing a 2.5-3 oz tip.
-
For distance fishing at a distance of about 4 meters, a harder tip (3-4 oz, such as the Tubertini R18 Distance Feeder) will be a good choice. This will ensure that the equipment will not interfere with the dynamics of strong long distance casting and will not be accidentally damaged.
When choosing a specific tip, you also need to take into account the weight of the set (feeder or bait basket). For example, a light set for the 15 g method combined with a too stiff tip (3 oz, or deflection at about 85 g) is a poor combination. Any attempt to tighten the line will move the feeder along the bottom. Experience teaches that matching the resistance of the container is still affected by the depth of the water and the course of the line.
How to match the tip to the conditions in the fishery?
Learning by heart all the combinations of sets and tip hardness is a difficult task. Fortunately, it is enough to look at the fishery to determine which tip will 90% turn out to be a good choice. See for yourself:
-
Extensive dam reservoirs and large lakes. Such bodies of water are prone to wind, so it is better to give up very flexible fiberglass tips (they can distort the bite signaling). Instead, we recommend carbon tips. For short distances, a 1 oz tip will work, and for casts over 50 m - a 1.5 oz one, such as the Tubertini R18 Distance Feeder. If you find that a strong wind is constantly setting the tip in motion, you may have to reach for a 2 oz, risking a little weaker signaling.
-
A fishery sheltered by trees. A windless pond almost always means comfortable fishing. For a sit-in, it's worth taking 0.75 oz glass or titanium tips. For slightly farther casts, a Tubertini Concept X carbon tip with a 1 oz curve will work well.
-
Ariver or channel with a calm current. Here you need to be very flexible. If the water flows lazily, you can reach for delicate 0.75 oz glass or titanium tips. However, you must be ready for the river to speed up. Then, with a slightly heavier basket (e.g., 30-40 g), you will have to use a 1 oz tip, such as Tubertini Atrax/Pro/Styx.
-
High draft river. In such fisheries, bites are usually very clear, because the fish cuts into the hook with the force of the current. If you plan to catch big and valiant fish and use capacious feeder baskets, go ahead and mount a 3 or 4 oz tip, such as the Tubertini Flexo New Generation.
Try different tips and gain experience
When method fishing, you can use a strong and stable tip - you certainly won't miss a bite. However, in classic feeder you need much more concentration and flexibility in adjusting your equipment. Over time, you will learn to intuitively choose your tip according to the conditions of the fishery and the fish you are hunting. Until then, apply our hints and enjoy every moment you spend on the water!
Comments (0)