Shopping Cart
There are no more items in your cart
- -20%
Delphin Coder 2+1 Alarms Set
Out-of-Stock
€71.31
€89.14
-20%
Time left
Lowest price within 30 days before promotion:
€70.16
Delphin Coder 2+1 Alarms Set
Delphin CODER is a set of alarms with a control unit, in which the ideal price-performance ratio is maintained. In particular, its advantages are reliability and 100% functionality, comparable to more expensive sets. The signal between the siren and the control unit can be transmitted over a distance of up to 140 m under ideal conditions. The whole thing is delivered in a hard plastic case, which ensures the safety of the equipment during transport.
The siren is powered by a 1x12V LR23A battery, which has a sufficiently long life. If the battery is low, the indicator will alert you with a short beep. Use the "V" switch to select one of 5 volume levels, including silent mode. It is also possible to select the desired level of tone and sensitivity (in the range of 1-9 cm), which also has 5 different levels. An unquestionable advantage of the signaling devices from the CODER set is the ability to choose from 7 colors of the signaling LED. Everyone can choose their favorite one, and if you want to change, you can simply choose a different color as per the instruction. A different sound will notify you of a bite and the LED will light up for 15 seconds after each bite. At the bottom there is an input for a 2.5 mm connector. It is also possible to turn on the position LED when fishing at night.
The receiver reliably signals bites with sound, light and, if the lever is moved to the right position, also with vibrations. With the "V" switch, you can select one of 5 volume levels, including silent mode, and use the switch labeled "T" to select the desired tone. The receiver has four colored LEDs that light up continuously for 15 seconds after biting. It is powered by a 1x9V battery. When its service life is nearing the end of its life, it will be indicated by a continuous short beep. The control unit, like the sirens, stores all the selected settings.
A maximum configuration of 3 + 1 (3 alarms and one receiver) can be saved for this set.
The average battery life is 100 hours of continuous use. Changing this value can be affected by the environment and the age and condition of the battery.
The Delphin CODER kit can be paired with the LightCONTACT lamp.
Batteries not included.
WARNING! On the control unit of the CODER kit, it is possible to turn off and then on individual LEDs, as shown in the video "Turning LEDs on/off". The LED can be turned off when the receiver is turned on by holding the "P" button for 2 seconds and then pressing it briefly. You can turn the LED back on in the same way. The individual LEDs can be switched between each other by pressing the "P" button for 2 seconds without another short press.
Technical parameters:
The 2 + 1 set includes:
- 2x bite indicator
- 1x bass drum
- 1x transport case
- 1x belt holder at the receiver
RECEIVER / Features:
- 5 volume levels (V- button, including silent mode)
- 5 different signal tones (T-button)
- Vibration mode (switch - right position)
- 4 colour indicator LEDs
- Saving selected settings in memory
- Two-position switch ON/OFF/VIBRATION
- Memory LED - illuminates continuously for 15 sec. after taking
- Low battery indicator (continuous beep)
- Kit test mode
- 140m range depending on terrain
- 1x9V battery power supply
SOUNDER / functions:
-Waterproof
- 5 volume levels (V-button, including silent mode)
- 5 different signal tones
- 5 sensitivity levels (S-button)
- 7 possible colours of the indicator LED
- Saving selected settings in memory
- Backbite signal - different tone
- Memory LED - illuminates continuously for 15 sec. after taking
- Low battery indicator with short beep
- Night LED position
- Non-slip rod bed
- Input for 2.5 mm jack
- Power supply 1x12V (type LR23A)
copy text download instructions
Delphin CODER is a set of alarms with a control unit, in which the ideal price-performance ratio is maintained. In particular, its advantages are reliability and 100% functionality, comparable to more expensive sets. The signal between the siren and the control unit can be transmitted over a distance of up to 140 m under ideal conditions. The whole thing is delivered in a hard plastic case, which ensures the safety of the equipment during transport.
The siren is powered by a 1x12V LR23A battery, which has a sufficiently long life. If the battery is low, the indicator will alert you with a short beep. Use the "V" switch to select one of 5 volume levels, including silent mode. It is also possible to select the desired level of tone and sensitivity (in the range of 1-9 cm), which also has 5 different levels. An unquestionable advantage of the signaling devices from the CODER set is the ability to choose from 7 colors of the signaling LED. Everyone can choose their favorite one, and if you want to change, you can simply choose a different color as per the instruction. A different sound will notify you of a bite and the LED will light up for 15 seconds after each bite. At the bottom there is an input for a 2.5 mm connector. It is also possible to turn on the position LED when fishing at night.
The receiver reliably signals bites with sound, light and, if the lever is moved to the right position, also with vibrations. With the "V" switch, you can select one of 5 volume levels, including silent mode, and use the switch labeled "T" to select the desired tone. The receiver has four colored LEDs that light up continuously for 15 seconds after biting. It is powered by a 1x9V battery. When its service life is nearing the end of its life, it will be indicated by a continuous short beep. The control unit, like the sirens, stores all the selected settings.
A maximum configuration of 3 + 1 (3 alarms and one receiver) can be saved for this set.
The average battery life is 100 hours of continuous use. Changing this value can be affected by the environment and the age and condition of the battery.
The Delphin CODER kit can be paired with the LightCONTACT lamp.
Batteries not included.
WARNING! On the control unit of the CODER kit, it is possible to turn off and then on individual LEDs, as shown in the video "Turning LEDs on/off". The LED can be turned off when the receiver is turned on by holding the "P" button for 2 seconds and then pressing it briefly. You can turn the LED back on in the same way. The individual LEDs can be switched between each other by pressing the "P" button for 2 seconds without another short press.
Technical parameters:
The 2 + 1 set includes:
- 2x bite indicator
- 1x bass drum
- 1x transport case
- 1x belt holder at the receiver
RECEIVER / Features:
- 5 volume levels (V- button, including silent mode)
- 5 different signal tones (T-button)
- Vibration mode (switch - right position)
- 4 colour indicator LEDs
- Saving selected settings in memory
- Two-position switch ON/OFF/VIBRATION
- Memory LED - illuminates continuously for 15 sec. after taking
- Low battery indicator (continuous beep)
- Kit test mode
- 140m range depending on terrain
- 1x9V battery power supply
SOUNDER / functions:
-Waterproof
- 5 volume levels (V-button, including silent mode)
- 5 different signal tones
- 5 sensitivity levels (S-button)
- 7 possible colours of the indicator LED
- Saving selected settings in memory
- Backbite signal - different tone
- Memory LED - illuminates continuously for 15 sec. after taking
- Low battery indicator with short beep
- Night LED position
- Non-slip rod bed
- Input for 2.5 mm jack
- Power supply 1x12V (type LR23A)
Kod: 101001353
8586018490016
No reviews
5 other products in the same category:
- -20%
- -20%
Out-of-Stock
- -20%
Out-of-Stock
- -20%
Last items in stock
Tap to zoom
